Feet per Second to Meters per Second Converter
Convert feet per second (ft/s) to meters per second (m/s) with the calculator below. Enter a value in either field for an instant result.
10 ft/s equals 3.048 m/s.
Feet per Second to Meters per Second Conversion Table
Use these common values as a quick reference.
| Feet per Second (ft/s) | Meters per Second (m/s) |
|---|---|
| 0.01 ft/s | 0.003048 m/s |
| 0.1 ft/s | 0.03048 m/s |
| 1 ft/s | 0.3048 m/s |
| 2 ft/s | 0.6096 m/s |
| 5 ft/s | 1.524 m/s |
| 10 ft/s | 3.048 m/s |
| 20 ft/s | 6.096 m/s |
| 50 ft/s | 15.24 m/s |
| 100 ft/s | 30.48 m/s |
| 1000 ft/s | 304.8 m/s |
How to Convert Foot per Second to Meter per Second
Conversion: 1 ft/s = 0.3048 m/s.
Formula: meters per second = feet per second × 0.3048
- Enter the foot per second value.
- Apply the conversion formula shown above.
- Round the result only as much as your use requires.
Example: 10 ft/s = 3.048 m/s.
Understanding the Foot per Second to Meter per Second Conversion
One foot per second equals 0.3048 m/s. Because this factor is less than one, the numerical value usually becomes smaller when converting from ft/s to m/s, even though the measured quantity does not change.
Speed is a rate that combines distance and time. Converting speed changes the distance unit, the time unit, or both while preserving the same underlying rate of travel.
Foot per Second is commonly used for engineering, ballistics and motion calculations, while Meter per Second is commonly used for physics, engineering and weather. Converting between them makes measurements easier to compare without changing the quantity being described.
Worked Foot per Second to Meter per Second Examples
These examples show how the conversion works for several practical values.
- 0.5 ft/s: 0.5 × 0.3048 = 0.1524 m/s.
- 3 ft/s: 3 × 0.3048 = 0.9144 m/s.
- 25 ft/s: 25 × 0.3048 = 7.62 m/s.
Accuracy, Precision and Rounding
Everyday Units stores each unit as a factor relative to a shared base unit—Meter per Second. The entered value is converted to that base and then to meter per second.
The calculator normally shows up to ten significant digits and removes unnecessary trailing zeros. This balances accuracy with readability. If the result will be used in engineering, science, medicine, trade or another precision-sensitive setting, follow the rounding and tolerance rules required for that specific use.
Common mistakes to avoid
- Check that the selected symbols match the units shown in the source measurement.
- Do not round the conversion factor before completing the calculation.
- Keep the unit symbol beside the number so the result cannot be mistaken for another measurement.
About the Units
Foot per Second (ft/s)
Definition: One foot per second is equal to 0.3048 m/s in the converter’s base system.
History and origin: This speed unit is derived from the foot and second.
Current use: This unit is commonly used for engineering, ballistics and motion calculations.
Meter per Second (m/s)
Definition: The meter per second is the base unit used by this speed converter.
History and origin: This is the SI-derived unit of speed.
Current use: This unit is commonly used for physics, engineering and weather.
Frequently Asked Questions
How many meters per second are in one foot per second?
One foot per second is 0.3048 m/s. The calculator uses this relationship for every value entered.
What is the reverse meter per second to foot per second conversion?
One meter per second equals 3.280839895 ft/s. Use the reverse-conversion link below to open that calculator directly.
Can I convert decimal and very small values?
Yes. Enter integers, decimals, or very small values in either field. Results use sensible precision, with scientific notation only when it improves readability.
How should I round the result?
Keep the full calculator result during intermediate work, then round once at the end. Everyday estimates may need only two or three decimal places, while technical work may require more significant digits.
Is the foot per second to meter per second conversion accurate?
The calculation uses the centralized conversion constant shown on this page. Everyday Units converts through the category’s base unit and keeps more precision internally than is normally needed for display.
How This Calculator Works
All calculations happen locally in your browser. No conversion request is sent to an external service. The same centralized unit definitions power the calculator, formula, examples and tables, which helps keep the figures consistent across every related page. Read our conversion methodology and sources for standards, assumptions and rounding details.
For a quick check, compare the forward and reverse relationships above: converting a value to m/s and back to ft/s should return the original measurement, apart from normal display rounding.