Feet to Inches Converter
Convert feet (ft) to inches (in) with the calculator below. Enter a value in either field for an instant result.
10 ft equals 120 in.
Feet to Inches Conversion Table
Use these common values as a quick reference.
| Feet (ft) | Inches (in) |
|---|---|
| 0.01 ft | 0.12 in |
| 0.1 ft | 1.2 in |
| 1 ft | 12 in |
| 2 ft | 24 in |
| 5 ft | 60 in |
| 10 ft | 120 in |
| 20 ft | 240 in |
| 50 ft | 600 in |
| 100 ft | 1200 in |
| 1000 ft | 12000 in |
How to Convert Foot to Inch
Conversion: 1 ft = 12 in.
Formula: inches = feet × 12
- Enter the foot value.
- Apply the conversion formula shown above.
- Round the result only as much as your use requires.
Example: 10 ft = 120 in.
Understanding the Foot to Inch Conversion
One foot equals 12 in. Because this factor is greater than one, the numerical value usually becomes larger when converting from ft to in, even though the measured quantity does not change.
Length conversions compare one-dimensional distance. Metric units scale by powers of ten, while imperial and US customary units use relationships such as 12 inches per foot and 5,280 feet per mile.
Foot is commonly used for height, rooms, altitude and construction, while Inch is commonly used for screen sizes and customary product dimensions. Converting between them makes measurements easier to compare without changing the quantity being described.
Worked Foot to Inch Examples
These examples show how the conversion works for several practical values.
- 0.5 ft: 0.5 × 12 = 6 in.
- 3 ft: 3 × 12 = 36 in.
- 25 ft: 25 × 12 = 300 in.
Accuracy, Precision and Rounding
Everyday Units stores each unit as a factor relative to a shared base unit—Meter. The entered value is converted to that base and then to inch.
The calculator normally shows up to ten significant digits and removes unnecessary trailing zeros. This balances accuracy with readability. If the result will be used in engineering, science, medicine, trade or another precision-sensitive setting, follow the rounding and tolerance rules required for that specific use.
Common mistakes to avoid
- Check that the selected symbols match the units shown in the source measurement.
- Do not round the conversion factor before completing the calculation.
- Keep the unit symbol beside the number so the result cannot be mistaken for another measurement.
About the Units
Foot (ft)
Definition: One foot is equal to 0.3048 m in the converter’s base system.
History and origin: The international foot is defined as exactly 0.3048 meters.
Current use: This unit is commonly used for height, rooms, altitude and construction.
Inch (in)
Definition: One inch is equal to 0.0254 m in the converter’s base system.
History and origin: The international inch was standardized at exactly 25.4 millimeters in 1959.
Current use: This unit is commonly used for screen sizes and customary product dimensions.
Frequently Asked Questions
How many inches are in one foot?
One foot is 12 in. The calculator uses this relationship for every value entered.
What is the reverse inch to foot conversion?
One inch equals 0.08333333333 ft. Use the reverse-conversion link below to open that calculator directly.
Can I convert decimal and very small values?
Yes. Enter integers, decimals, or very small values in either field. Results use sensible precision, with scientific notation only when it improves readability.
How should I round the result?
Keep the full calculator result during intermediate work, then round once at the end. Everyday estimates may need only two or three decimal places, while technical work may require more significant digits.
Is the foot to inch conversion accurate?
The calculation uses the centralized conversion constant shown on this page. Everyday Units converts through the category’s base unit and keeps more precision internally than is normally needed for display.
How This Calculator Works
All calculations happen locally in your browser. No conversion request is sent to an external service. The same centralized unit definitions power the calculator, formula, examples and tables, which helps keep the figures consistent across every related page. Read our conversion methodology and sources for standards, assumptions and rounding details.
For a quick check, compare the forward and reverse relationships above: converting a value to in and back to ft should return the original measurement, apart from normal display rounding.